OPERATING INSTRUCTIONS

Installing the battery

Remove the rear casing. Install an alkaline 9 volts battery into the battery compartment with the correct polarity (+ -).
After installing the battery, place the cover back on and install the enclosed 4 screws into position.

To arm the system

                       

Press on the two green keys (#2 & 3) simultaneously. You will hear one long high "beep" for armament confirmation. The first time you arm the system, it will also produce 2 short "beep". We programmed it that way, to show you that the system can warn you twice, before triggering off the alarm sound, preventing false alarms. Once armed, the first and second movements will produce a loud warning "beep". The third movement will trigger the alarm sound for 15 seconds and then it will stop.

To disarm the system

                       

Enter your personal 5 numbers code. You will hear one long "beep" for disarmament confirmation. Your initial code is 1-2-3-2-1. It is written inside the battery compartment.

Changing your personal 5 numbers code

                       

Press on the two purple keys at the same time (1 & 3); you will hear a long high tone "beep".

Enter the initial code (1-2-3-2-1) or if you already change it, your actual code first, you will hear a long high tone "beep".

Enter you new code and you will hear another long high tone "beep".

Enter you new code a second time and you will hear 7 short "beep" to confirm that your new code is registered.

If you did not enter the correct initial code or the same new code 2 times, you will hear a long & low sound to notify you that your modification is rejected.

Each number can be made from one, 2 or 3 keys together. It can be simple or complex. Here are some examples: (2-13-123-1-3) or (2-2-2-3-1) or (12-23-13-123-123) or (1-1-1-2-3).

Options adjustment

                       

Press on the two red keys (1 & 2) simultaneously. You will hear 3 short "beep" and get access to the options selection program and you automatically reset the options to zero.

If you choose not to activate or cancel the options, press again on the two red keys (1 & 2) to register your selection or wait 10 seconds for the automatic exit the options selection function. You will hear 3 short "beep to confirm that you have exit the options selection function.

If you want to adjust the Warning "BEEP" and Auto-Armament options, follow the instructions below BEFORE exiting the options selection function.

Warning "BEEP" option (Anti-False alarm)

                       

To activate Warning "BEEP" option when you arm the system:

Press again the #2 key (loudspeaker design) to engage the Warning "BEEP" option and you will hear one short "beep" to confirm you selection.

Each time you press on the # 2 key gives you an extra warning "BEEP", up to 7 times per minute. Counter reset to 0 after one minute.

This option allows your system to produce a loud "BEEP" after a shock or a displacement of your goods, when your system is arm. This option prevents false alarms.

To cancel the option: Execute the options adjustment procedure. It reset the option to zero warning "BEEP".

Auto-armament option

                       

To activate Auto-armament option when you arm the system:

Press again on the #1 key (chronometer design) and get a 15 seconds delay before auto-armament after immobilization. You will hear a "phone like beep" to confirm you selection.

Each time you press on the # 1 key, gives you an extra 15 seconds delay up to 2 minutes.

This option allows your system to protect you goods even if you forgot to arm the system. For example, you activate this option and install the system on your child’s bicycle. You press the 2 green keys to arm the system. The system checks if there is movement. If not, after 15 seconds the system arms itself. You have to enter the code to temporarily disarm the system and use the bicycle. As long as it is moving the system doesn’t arm itself. Once the bicycle stop moving, 15 seconds later the bicycle is protect.

To cancel the option: Execute the options adjustment procedure. It reset the option to zero second and disable the Auto-Armament.

Arming the system with the Warning "BEEP" option activated:

When you press on the 2 green keys to arm your system, you will hear the number of short "beep" for each warning corresponding to your selection, immediately after the long high "beep" for armament confirmation or after the "phone like beeps" if the auto-armament has been activate.

Arming the system with the Auto armament activated:

When you press on the 2 green keys to arm your system, you will hear the number of "phone like beep" corresponding to your selection. The system instantly monitors the movement on your goods and will arm itself after your selected immobilization delay. You will hear a few short "beep" at the end of the delay from 4 to 0 second countdown to advise you of the imminent armament and then you will hear one long high "beep" at armament.

Disarming the system with the Auto Armament activated:

Enter your personal 5 number disarming code and it will temporarily disarm your system but the Auto-Armament is still engaged. You will then hear the number of "phone like beep" corresponding to your selection and the system will instantly monitor the movement on your goods and will arm itself after your selected immobilization delay.

To deactivate the Auto Armament option:

Once you entered your disarming code or while the system is monitoring movement for countdown, enter your disarming 5 numbers code one more time or your private Auto-Armament deactivation 5 numbers code.

To select a private Auto-Armament deactivation code:

                       

After you selected the Auto-armament option

The basic deactivation code for this option is the same then the disarmament code. However, only after you pressed at least one time on the Chronometer key, you can select a private deactivation code by pressing on the #3 key (key design). Then you have access to the second 5 numbers code.

Read the paragraph "Changing your personal 5 numbers code" and use the same procedure. Your initial code used for this second private code selection procedure will always be the same register in your system.

Resetting this option erase the Auto armament privacy deactivation code.

Using the alarm for personal protection

                       

When disarm, press keys 1-2-3 at the same time to activate instantly the alarm sound